ENGINE START/STOP Button
Changing the Power Mode
ENGINE START/STOP Button
ENGINE START/STOP Button Operating Range
You can start the engine when the keyless access remote is inside the vehicle. The engine may also run if the keyless access remote is close to the door or window, even if it is outside the vehicle. ON mode: Indicator in the button is off, if the engine is running. If the keyless access remote battery is weak, beeper sounds and the TO START, HOLD REMOTE NEAR START BUTTON message appears on the multiinformation display.
Power Mode Reminder
If you open the driver’s door when the power mode is set to ACCESSORY, a warning buzzer sounds.
Keyless Access Remote Reminder
Warning buzzers may sound from inside or/ and outside the vehicle to remind you that the keyless access remote is out of the vehicle. If the buzzer continues even after the remote is put back inside, place it to be within its operational range.
When the power mode is in ON
If the keyless access remote is taken out of the vehicle, and the driver’s door is closed, warning buzzers sound from both inside and outside the vehicle. A warning message on the multi-information display notifies the driver inside that the remote is out.
When the power mode is in ACCESSORY or in VEHICLE OFF (LOCK)
If the keyless access remote is taken out of the vehicle, and the driver’s door is closed, a warning buzzer sounds from outside the vehicle.
Keyless Access Remote Reminder
When the keyless access remote is within the system’s operational range, and the driver’s door is closed, the warning function cancels. If the keyless access remote is taken out of the vehicle after the engine has been started, you can no longer change the ENGINE START/STOP button mode or restart the engine. Always make sure if the remote is in your vehicle when you operate the ENGINE START/STOP button. Removing the keyless access remote from the vehicle through a window does not activate the warning buzzer. Do not put the keyless access remote on the dashboard or in the glove box. It may cause the warning buzzer to go off. Under some other conditions that can prevent the vehicle from locating the remote, the warning buzzer may also go off even if the remote is within the system’s operational range.
See also:
Wear Indicators
The groove where the wear indicator is
located is 1/16 inch (1.6 mm) shallower than
elsewhere on the tire. If the tread has worn so
that the indicator is exposed, replace the tire.
Worn out tire ...
Tire and Loading Information Label
The label attached to the driver’s doorjamb provides necessary tire and
loading information.
Tire and Loading Information Label
The tire and loading information label attached to the
driver’ ...
If the Malfunction Indicator Lamp Comes On or Blinks
Reasons for indicator lamp to
come on or blink
• Comes on when there is a problem with the engine emissions control
system, or the fuel fill cap is missing, or loose.
• Blinks when engine mis ...