Key Types and Functions

This vehicle comes with the following keys:

Keys

Keyless access remote

Use the keyless access remote to start and stop the engine, to lock and unlock the doors and to open the trunk. There is a PANIC button in the remote transmitter.

The built-in key can be used to lock/unlock the

The built-in key can be used to lock/unlock the doors when the keyless access remote battery becomes weak and the power door lock/ unlock operation is disabled. To remove the built-in key, pull it out while pressing the release button. To reinstall the built-in key, push the built-in key into the keyless access remote until it clicks.

Key Types and Functions

Key Types and Functions

All of the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft.

The keys contain precision electronics. Adhere to the following advice to prevent damage to the electronics: • Do not leave the keys in direct sunlight, or in locations with high temperature or high humidity. • Do not drop the keys or set heavy objects on them. • Keep the keys away from liquids. • Do not take the keys apart except for replacing the battery. If the circuits in the keys are damaged, the engine may not start, and the keyless access system may not work. If the keys do not work properly, have them inspected by a dealer.

Key Number Tag

Contains a number that you will need if you purchase a replacement key.

Key Number Tag

Key Number Tag

Keep the key number tag separate from the key in a safe place outside of your vehicle. If you wish to purchase an additional key, contact a dealer. If you lose your key and you cannot start the engine, contact a dealer.

    See also:

    iPod®/USB Flash Drive
    If an error occurs while playing an iPod® or USB flash drive, you may see the following error messages. If you cannot clear the error message, contact a dealer. ...

    Synchronized Mode
    You can set the temperature synchronously for the driver side and the passenger side in synchronized mode. 1. Press the SYNC button.  - The system will switch to synchronized mode. 2. Adj ...

    Jump Starting
    Jump Starting Procedure Turn off the power to electric devices, such as audio and lights. Turn off the engine, then open the hood. 1. Connect the first jumper cable to your vehicle's battery ...